該機是一種固定裝置的垂直機械輸送設備，主要是用于糧食、食品、飼料和化工等部門顆粒和粉狀物料的垂直提升輸送。
It is a kind of fixed vertical conveying equipment, mainly used in grain, food, feed, chemical engineering and other industries for vertical lifting & conveying of granular & powdery materials.
特點：
Characteristics:
1、驅動功率小,采用流入式喂料、誘導式卸料、大容量的料斗密集型布置.在物料提升時幾乎無回料和挖料現象,因此無效功率少。
The driving power is small; flow-type feeding & induction-type discharge modes are adopted; large-capacity hoppers are set intensively. It is almost free of material return & excavation phenomena during material lifting, therefore, there is little reactive power.
2、專用模具壓制多層咬邊的加強筒體，強度高、密封性好。
Special mould is adopted to compact multi-layer undercut strengthened drum, and high strength and satisfactory sealing performance can be achieved.
3、提升范圍廣,這類提升機對物料的種類、特性要求少,不但能提升一般粉狀、小顆粒狀物料,而且可提升磨琢性較大的物料.密封性好,環境污染少。
It has a wide lifting range; less requirements for category and characteristics are proposed; it can lift general powdery & granular materials, as well as materials with relatively high milling performance. Satisfactory sealing performance and little environmental pollution can be guaranteed.
4、使用壽命長,提升機的喂料采取流入式,無需用斗挖料,材料之間很少發生擠壓和碰撞現象。本機在設計時保證物料在喂料、卸料時少有撒落,減少了機械磨損。
It has a long service life. Flow-type feeding mode is adopted, and it is unnecessary to excavate materials with bucket; besides, there are little material squeezing and collision phenomena. The equipment is designed to ensure less material loss during feeding and discharging, and mechanical wear is reduced.
技術參數：
Technical parameters:
| 規格型號 Spec. & model | 畚斗規格 Spec. of winnowing pan | 傳動比 Drive ratio | 畚斗帶線速（m/s） Line speed of winnowing pan belt (m/s) | 產量（t/h） Output (t/h) | ||
| 粉料 Powdery materials | 粒料 Granular materials | 粉料 Powdery materials | 粒料 Granular materials | |||
| TDTG26/13 | DQ1311 DS1311 | 9-23 | 0.8-1.2 | 1.2-2.2 | 1.2-2 | 6.5-9.5 |
| TDTG26/18 | DQ1814 DS1814 | 9-23 | 0.8-1.2 | 1.2-2.2 | 2-4.5 | 15-20 |
| TDTG26/23 | DQ2314 DS2314 | 9-23 | 0.8-1.2 | 1.2-2.2 | 5-8 | 16-25 |
| TDTG36/13 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 2-3 | 8-12 |
| TDTG36/18 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 4.5-6 | 16-17 |
| TDTG36/23 | DQ1311 DS1311 | 9-23 | 1.2-1.6 | 1.6-3 | 7-10 | 20-32 |
| TDTG36/28 | DQ2816 DS2816 | 9-23 | 1.2-1.6 | 1.6-3 | 8-11 | 25-40 |
| TDTG40/18 | DQ1814 DS1814 | 9-23 | 1.3-1.8 | 1.8-3.3 | 5-7 | 22-34 |
| TDTG50/23 | DQ2314 DS2314 | 11-29 | 1.3-1.8 | 1.7-3.4 | 8-12 | 30-50 |
| TDTG50/28 | DQ2816 DS2816 | 11-29 | 1.3-1.8 | 1.7-3.4 | 9-13 | 40-65 |
