進口閥門、進口呼吸閥、英國UK進口呼吸閥、英國羅托克閥門
英國羅托克進口閥門(ROTORK)有限公司
英國羅托克閥門(ROTORK)是歐洲地區流體控制領域的主要生產和供應商之一。公司總部位于英國威爾士,公司致力于科研開發流體控制閥門,生產流體控制設備系統 在許多個國家均有生產閥門基地。公司產品的用戶涉及石油、化工、電力、冶金、制藥、食品、水處理、市政給排水、天然氣、造紙、電子工業、樓宇、機械設備配套等領域。
英國羅托克閥門(ROTORK)主要產品有:進口球閥、進口閘閥、進口蝶閥、進口截止閥、進口止回閥、進口調節閥、進口電磁閥、進口安全閥、進口針型閥、進口疏水閥、進口旋塞閥、進口隔膜閥、進口排氣閥、進口呼吸閥、進口過濾器、進口阻火器、進口角座閥、進口平衡閥、進口切斷閥、進口減壓閥、進口電動閥門、進口氣動閥門、進口高壓閥門、進口蒸汽閥門等進口閥門系列產品。
UK Rotork valve (ROTORK) is Europe's main production area of fluid control and suppliers. Company based in Wales, the company is committed to research and development of fluid control valves, fluid control equipment, production systems in many countries, the production valve base. Customers involved in oil products, chemicals, electric power, metallurgy, pharmaceutical, food, water treatment, municipal water supply and drainage, gas, paper making, electronic industry, building, mechanical equipment and other fields.
UK Rotork valve (ROTORK) The main products are: electric valve, pneumatic valve, high pressure valves, ball valves, gate valve, butterfly valve, globe valve, check valve, control valve, solenoid valve, safety valve , needle valves, steam trap | trap, plug valves, diaphragm valve, duckbill valve, discharge valve, exhaust valve, breathing valves, filters, flame arrester, the throttle valve, angle seat valve, balance valve, sewage valves, mud valves, isolating valve, valve, pipe clip valve, plunger valve, foot valve, depending on the lens, flange, hydraulic control valves.
中國總代理:上海埃克森閥門有限公司
: 手機:
:rotorkvalves
閥門:http://www.famen126.com
閥門:http://www.fm668.com
閥門:http://www.maifamen.com
地址:上海市嘉定區華亭工業區86號
|
進口呼吸閥概述
呼吸閥類似于單向止逆閥,它只能向外呼氣,不能向內吸氣,當系統內壓力升高時,氣體便經過呼吸閥向外放空,保證系統的壓力恒定。一般它被用在常壓或低壓貯罐上。焦炭塔的呼吸閥有兩個用處:一、放水時,吸氣,以利塔內存水順利放出;二、呼氣,蒸汽趕空氣時,用以放凈空氣,脫水放汽時,用以檢查塔內是否為正壓。呼吸閥是用于安裝原油、汽油、煤油、輕柴油、芳烴等固定頂式儲罐上的主要安全設備,是起蒸發損耗與保護儲罐在受超壓或 真空時免遭破壞的作用。此閥通常與阻火器配套使用。當外界大氣壓力大于罐內壓力時 就會往罐內補氣 從而達到內外壓力的平衡。呼吸閥是固定在儲罐頂上的通風裝置,以保證罐內壓力的正常狀態,防止罐內超壓或真空使儲罐遭受損壞,也可減少罐內液體揮發損失。根據中國《石油化工設計防火規范》(GB50160-92)的規定:“甲、乙類液體的固定頂罐,應設阻火器和呼吸閥”,結構緊湊、重量輕、通風量大、泄露小等優點。產品有單呼閥、單吸閥、呼吸閥,各種結構型式均可與阻火器組合構造,也可配制所需的接管。